UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Eddystone EC10 Power Supply 4 Pin Connector

Argus25 · 19th Feb 2018, 3:01 am

Hi Mike,

I'm just up the road from you in M'Dore. I looked through my parts and sadly I couldn't find one of those plugs, that short one seems quite unique to the EC-10 and I haven't seen it elsewhere.

I really like the EC-10 and have a few of them, on one it had an L/O buffer added to drive an external frequency counter with the IF offset applied.

All of my EC-10 units have had the RF transistors replaced due to the tin whisker problem. I used AF178's which I bolted in using the method shown here:

https://www.vintage-radio.net/forum/...d.php?t=139849

19th Feb 2018, 3:01 am	#3
Argus25 No Longer a Member Join Date: Oct 2016 Location: Maroochydore, Queensland, Australia. Posts: 2,679	Re: Eddystone EC10 Power Supply 4 Pin Connector Hi Mike, I'm just up the road from you in M'Dore. I looked through my parts and sadly I couldn't find one of those plugs, that short one seems quite unique to the EC-10 and I haven't seen it elsewhere. I really like the EC-10 and have a few of them, on one it had an L/O buffer added to drive an external frequency counter with the IF offset applied. All of my EC-10 units have had the RF transistors replaced due to the tin whisker problem. I used AF178's which I bolted in using the method shown here: https://www.vintage-radio.net/forum/...d.php?t=139849