UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Quick-and-dirty testgear: mains voltage monitor.

Mr Moose · 12th Aug 2018, 7:34 pm

Hello,
You could use a chunky piece of wood. Drill a large hole at one end for the display and a small one at the other for the cable. A piece of say 3"x2" about 4"-6" long should have enough weight to hold it in place. Chamfer or round off the edges and paint or polish to your taste.
Yours, Richard

12th Aug 2018, 7:34 pm	#7
Mr Moose Octode Join Date: Jul 2008 Location: Gloucestershire, UK. Posts: 1,043	Re: Quick-and-dirty testgear: mains voltage monitor. Hello, You could use a chunky piece of wood. Drill a large hole at one end for the display and a small one at the other for the cable. A piece of say 3"x2" about 4"-6" long should have enough weight to hold it in place. Chamfer or round off the edges and paint or polish to your taste. Yours, Richard