UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

PJL · 27th Feb 2017, 10:01 am

You might blow the fuse in the meter so I would suggest you use a lamp limiter when you do this. As a fault has already been repaired in the HT PSU, I am hoping it is just the fuse that has gone.

27th Feb 2017, 10:01 am	#148
PJL Dekatron Join Date: Sep 2005 Location: Seaford, East Sussex, UK. Posts: 5,997	Re: Tandberg Huldra 8 valve failure You might blow the fuse in the meter so I would suggest you use a lamp limiter when you do this. As a fault has already been repaired in the HT PSU, I am hoping it is just the fuse that has gone.