Quote:
Originally Posted by GrimJosef
Quote:
Originally Posted by dougietamson
... Seems the E88CC valves from the good manufacturers, cost an arm and a leg ...
|
They're sometimes priced at an arm and a leg. But does anyone ever buy them ?
I note that Langrex have NOS Dutch-production Mullard E88CCs for £60 each plus VAT.
Cheers,
GJ
|
I tested all the 4 x NOS 6N5P valves I bought a while back for £10 inc p&p and found some good ones, 3 had the triodes within 2.5% of each other.
Sounded good in the amp (2 x 6P13S line scan valves) similar to EL36 but different pinout and a bit beefier (not to be confused with the 6P31S which is an EL36 drop-in) Needs a bias adjust for each output valve, set them to 60mA at idle.
Preamp is the 6N2P, 6N5P in the PI, 2mV hum measured across the speaker out. Quiet enough for a guitar amp.
https://frank.pocnet.net/sheets/113/6/6P13S.pdf
Doug