[JohnBHanson]

Thats wonderful news...
I recommend you image the rodime drive or at least copy all the files off it.

PS t-net can be used to copy files off. It can also be used with disked to
image the drive but you might have to be a bit careful to do it right (Use
the File Set and File Write commands. Use a t-net drive in the file set
command and then work out the number of sectors to write in the File
Write Command (Note sectors are given as 128 byte sectors)

Decimal numbers can be input with a % prefix and i gives infomation about
the disk layout.

In otherwords disked will copy (part of) a disk into a file. The file can be
a network file if working through t-net.

You will have to backup a: and b: as different files
and join them together latter but it should work.


If you manage this I look forward to you posting the image on your site and
running it under xbeaver.

Best wishes - I bet you are now all smiles.