Thanks for that John,
I have one remaining anomaly with xbeaver in that whilst I can now boot to the GM557_MASTER.img disk with both SIMON 4.1 and RP/M 2.3, I cannot see any files on the disk using DIR in either case. If I place the same image on the Gotek and boot to real hardware of the same combination, I can see the files. CPMTOOLS shows the files also. I am obviously missing something...
My Config is:
Code:
cpuclock 4
board 0xfe gm813_mmu
board 0xb0 gm832 Gemini557 green keyboard gemini
board 0xe0 gm829_floppy -geometry 80.2.10.0.512 ./Disks/GM557_MASTER.img
board 0xb8 serial_8250 bvrnet ./NetworkDrive
#binload 0xf000 ./ROMs/SIMON4.2.ROM
bnload 0xf000 ./ROMs/RPM_2.3.ROM
byte 0f0a8 21 00 f0 #Patch top of ram for RPM
No errors are reported when launching with -vv.