View Single Post
Old 29th Oct 2021, 4:32 am   #18
DennisCA
Tetrode
 
Join Date: Sep 2021
Location: Vaasa, Finland.
Posts: 82
Default Re: Setting up external antenna for AM and FM reception?

I found the distribution amp last night and it's in the electrical panel for my house, that's where all the lines in come in. It says 5 to 1ghz on it so should be OK for radio.

I've attached some photos of my opening up my panel, one can see the distribution amp and where the line from the cable company comes in from below ground.

The electrical lines, fiber and cable lines are here all underground and I have a pipe that goes all the way to the edge of my property, 30-40 meters away possible and that's where all the service comes in. So I cannot reuse the cable line, I can only disconnect it and leave it hanging.

Fortunately my panel is near the front door so I could install a mast on the side of the house and run coax along the eaves and then into that room into the panel.
Attached Thumbnails
Click image for larger version

Name:	f30wylWh.jpg
Views:	69
Size:	42.0 KB
ID:	244505   Click image for larger version

Name:	VYftAm3h.jpg
Views:	61
Size:	38.7 KB
ID:	244506   Click image for larger version

Name:	ZjkNQBwh.jpg
Views:	59
Size:	44.5 KB
ID:	244507  
DennisCA is offline