View Single Post
Old 9th Feb 2018, 12:30 pm   #2
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: Repairing electromagnetic bell

The two rectangled terminals are probably connected to the coils via the bell's interrupter contacts. If the contacts are dirty you won't see continuity. It shouldn't be too difficult to rewind one or both of the coils if necessary. They're wound with thick wire though, so are probably OK.
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is online now