UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

TonyDuell · 10th Dec 2018, 4:50 pm

At least start with the 'obvious' :

Check the contacts on the cartridge connector are clean, not bent or shorting

Check the +5V line (I assume) and other supply lines. Correct voltage? What about ripple?

10th Dec 2018, 4:50 pm	#2
TonyDuell Dekatron Join Date: Jun 2015 Location: Biggin Hill, London, UK. Posts: 5,215	Re: Atari 2600 R.I.P. At least start with the 'obvious' : Check the contacts on the cartridge connector are clean, not bent or shorting Check the +5V line (I assume) and other supply lines. Correct voltage? What about ripple?