View Single Post
Old 23rd Feb 2017, 1:04 am   #130
roverp6
Triode
 
roverp6's Avatar
 
Join Date: Dec 2016
Location: Brandon, Manitoba, Canada
Posts: 46
Default Re: Tandberg Huldra 8 valve failure

This is the list of fuses, so far i have only checked and replaced S3
8.2.6 Fuses

Ref. no. Type Remarks
S.H.8 2000 m.A, mites. slow Pl. no. 19408, Wickmann
S2 H8 6. A PI, no. 1957 7, Wickmann
S3 H8 160 mA, slow 30 x 5 mm PI. no. 19197, Wickmann
S4 H8 Thermal fuse, secure. metal 1:12 ° C
S5-H8 Fuse Lamp, 12 V, 18 W. Osram, no. 6475
S5-H8 Sikringsla mpe, 12 V, 18 W, Osram no. 6475
R2Al-H8 Skringsmotstand kohm 10% 2.5 W 16038 T previously used Vitrohm 16025 T

i am going to check the others, which i haven't done up to now. as far as the lamp limiter, it hasn't been in use for the last few checks, and remains off. the set is currently running in the 115v position. and last i am going to check the transformer reading
roverp6 is offline