[mike_newcomb]

Hi Dave, a photo of the Fan would be interesting, as I was unable to find one showing that particular model.

Going back over the past 30 years or more, I thought of the original Loovent, made by Airflow of High Wycombe, as the Rolls Royce of Extractor Fans, particularly the twin motor version.

Sadly that is no longer true.

Now, Airflow no longer sell parts, instead advising replace the complete unit, some of which are > £200.

Originally Motors were produced inhouse with a start circuit. Now are from India without such, whose Stators frequently go o/c and/or the Bearings rapidly fail The units are guaranteed two years, but can fail soon after.

I have a number of Loovents with failed (later) Motors, but Airflow will not supply spares. Have considered the only way forward would be contacting the Indian Motor Manufacturer direct.

This saddens me, being another example of British Companies looking at the bottom line, rather than above it such as Quality, Endurance etc.

I also have some decades old earlier Fans working perfectly. Although regularly serviced, by dismantling (including Motors) in order to clean and lubricate the Bearings. Something not mentioned in the User Guide.

Regards - Mike