UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Roberts RT7

stonehopper · 9th May 2009, 11:27 am

OK, chores done, back on the set.

Exactly as instructed;
200Ohm range:
R26 & R27 - where;
TR6 base was connected = 34.5
TR7 base was connected = 37.5

2000mV;
TR6 base was connected =194
TR7 base was connetced =195

Did not try any other range - are these accurate enough?

Derek

9th May 2009, 11:27 am	#129
stonehopper Retired Dormant Member Join Date: Apr 2009 Location: St Albans Posts: 50	Re: Roberts RT7 - problem OK, chores done, back on the set. Exactly as instructed; 200Ohm range: R26 & R27 - where; TR6 base was connected = 34.5 TR7 base was connected = 37.5 2000mV; TR6 base was connected =194 TR7 base was connetced =195 Did not try any other range - are these accurate enough? Derek