View Single Post
Old 13th Feb 2019, 10:38 am   #6
CesarLG
Tetrode
 
CesarLG's Avatar
 
Join Date: Apr 2018
Location: Barcelona, Spain.
Posts: 62
Default Re: Hammarlund HQ-129-X caps

I checked that and it is fine. I have been looking at all resistors with no luck. Could it be a a problem with a tube?
What I have made for now is putting a 1M resistor in the smeter wire to save the needle smacking against the bar end. I have measured 230v on this wire
__________________
EA3IAV
CesarLG is offline