View Single Post
Old 10th Sep 2019, 8:58 am   #6
Nuvistor's Avatar
Join Date: Aug 2013
Location: Wigan, Greater Manchester, UK.
Posts: 7,731
Default Re: Cathode follower line out - best practice

Hi Andy,
What you say appears to be the cause, R26 is the feed resistor to C20, R26 is 15K. G2 of V4 is connected to the main HT line straight off the main smoothing cap C33.

It just seemed the simpler way to sort it out rather than change the cathode follower that appears to work ok.
Nuvistor is online now