View Single Post
Old 10th Sep 2017, 10:15 am   #2
Ted Kendall
Nonode
 
Join Date: Jul 2008
Location: Kington, Herefordshire, UK.
Posts: 2,773
Default Re: Beogram 1000 stylus retip required.

There's little point(!) in re-tipping the replacement, since this is almost certainly a third-party job and not of the quality of your original. Components such as the hinge and the cantilever are likely to be stiffer and heavier than the original, to the dtriment of tracking performance. Send your original to Expert, get a report on the tip condition and have it re-tipped if needs be. Problem solved.
Ted Kendall is offline