View Single Post
Old 28th Aug 2018, 9:16 pm   #2
Nickthedentist
Dekatron
 
Nickthedentist's Avatar
 
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,820
Default Re: Bent finger stop

You might be able to slip a sheet of toughish metal (e.g. the edge of an old door hinge supported in a vice) under the bent bit, then give the bent bit a gentle bash with a hammer, padded with a softer metal like an offcut of aluminium or even a bit of harwood.

Nick.
Nickthedentist is offline