View Single Post
Old 17th Nov 2017, 1:33 pm   #1
monaro0162
Pentode
 
Join Date: Sep 2016
Location: Stansted, Essex, UK.
Posts: 185
Default AKAI GXC-46D Cassette recorder/player

Hello,

I have one of these machines, it is in very good condition and plays cassettes very well, but has one issue: A 50hz mains hum (lowish level) can be heard in the right channel when the motor is engaged, the left channel is fine. When the motor is disengaged the hum disappears. I'm assuming that the motor is loading the power supply which in turn is causing the hum, may be there is a cap going or the psu voltage is low? Could anybody advise where the power supply rail (or rails) can be probed with a scope so as I can see what is going on?
monaro0162 is offline