Re: Bush AC34, no sound.
Steve's right, do a little reading and learning first for your own sfatey and peace of mind.
If the set has been stored anywhere damp the output transformer could be suspect... they have a tendancy to green spot causing them to go open circuit on the primary side, just the same as DAC90A's. You'll see that is a common reported fault on here.
With the set turned off and unplugged you could measure its resistance which will tell you if it's kaput.
You should have been able to measue two pins on the UL41 with high voltage present... one (the anode) greater than the other.
Pete
|