UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Gemini 80-Bus System

JohnBHanson · 12th Jan 2020, 2:45 pm

JBH: If I put the 849 MFB in with the 811 and IVC (Is this combination of cards safe?) and run BASIC under RP/M (from Tape), would running your program give you what you need?

Yes that would be fine. However the basic output is more than one screen high so running the output to the serial port and recording it on a PC rather than manually recording the output might be easiest. To do this you may need to change the print to lprint in the program using a serial line printer.

Many thanks for doing this, would be nice to tie up this loose end.

12th Jan 2020, 2:45 pm	#304
JohnBHanson Heptode Join Date: Aug 2009 Location: Worthing, Sussex, UK. Posts: 662	Re: Gemini 80-Bus System JBH: If I put the 849 MFB in with the 811 and IVC (Is this combination of cards safe?) and run BASIC under RP/M (from Tape), would running your program give you what you need? Yes that would be fine. However the basic output is more than one screen high so running the output to the serial port and recording it on a PC rather than manually recording the output might be easiest. To do this you may need to change the print to lprint in the program using a serial line printer. Many thanks for doing this, would be nice to tie up this loose end.