UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Anyone building a PICL? more PCBs available

Phil__G · 4th May 2023, 12:45 am

If its not clear, there are no external power supply connections to Mikes programmer, the whole thing is powered by the USB connection from your PC.
Just make the 5 wired connections, and join socket pins 11 to 21 and 12 to 31, Easy peasy.
Serial port is 9600 baud (8/N/1) with local echo on terminal. Commands are:
Blank test
Erase chip
ID
Dump ssss eeee
Program the 16F18877

4th May 2023, 12:45 am	#106
Phil__G Octode Join Date: Mar 2011 Location: North Yorkshire, UK. Posts: 1,115	Re: Anyone building a PICL? more PCBs available If its not clear, there are no external power supply connections to Mikes programmer, the whole thing is powered by the USB connection from your PC. Just make the 5 wired connections, and join socket pins 11 to 21 and 12 to 31, Easy peasy. Serial port is 9600 baud (8/N/1) with local echo on terminal. Commands are: Blank test Erase chip ID Dump ssss eeee Program the 16F18877 Last edited by Phil__G; 4th May 2023 at 12:54 am.