View Single Post
Old 28th May 2020, 1:58 pm   #1
woodchips
Heptode
 
Join Date: May 2010
Location: Grantham, Lincolnshire, UK.
Posts: 837
Default Lathe, mill, drill and grinder

Not really electronic, please delete if too far away from what should be listed here.

I have an Adcock & Shipley Universal Machine Tool that I can no longer keep. For more detailed info look on

http://www.lathes.co.uk/adcock&shipl...ion/index.html

it is the smaller of the two machines.

Firstly, it weighs the best part of 2.1/2 tonnes. Secondly the smallest bit when dismantled weighs about 1 tonne. With all the extra bits total weight must be 3.1/2 tonnes.

As can be seen it is a combined (rubbish) lathe with a really nice H&V mill, pillar drill and universal grinder. This machine is actually parts of two machines, so just about complete. Grinder comes with a Diaform grinder attachment plus various other odds and ends bought new from msc.com.

It is located at Sutton on Sea, retirement, plans never happened.

I have the mill from the other machine on a steel cabinet in my garage. The grinder could also be split out from the main machine.

It will take many months of restoration to get it all back in working order but the second machine I bought with lathe and mill was fully operational.

Looking for 1200 for everything.
woodchips is offline   Reply With Quote