View Single Post
Old 18th Jul 2019, 9:59 am   #17
TMGE666
Triode
 
Join Date: Nov 2008
Location: Hobart, Tasmania, Australia
Posts: 16
Default Re: E.A.R Bantam Reproducer

Finally got around to putting a new capacitor in the machine. All good and now the sound does not cut out. Irritatingly, I cannot seem to adjust the tone arm so that it allows it enough travel towards the centre of the record to enable the motor to switch off, its better than it was so I know where to adjust the two screws under the tone arm, but I seem to have run out of adjustment and its still not perfect. The motor sometimes seems to need to warm up before it reaches playing speed. It is what it is. Thanks for all the help.

Cheers,

D.
TMGE666 is offline