Quote:
Originally Posted by Slothie
Do the DIN connectors on the VDU have 2 or 3 rows (i.e. are they 64 pins in a 96 way shell or the 64 way shell)?
|
Good question. My gut feeling is it's the 64-way housing because the rows on the VDU PCB are screenprinted A and B, whereas if it used the two outer rows of a three-row housing I would expect that to be A and C.
If you trawl back miles through your main project thread I believe I posted several pictures of the edge of the VDU PCB with its DIN connector fitted, but I will have a look at it again when I get home to confirm.