Quote:
Originally Posted by Merseygull
They're belt drives, but the (plastic) platters are solid - ie there's no hole to get ny finger through to attach the drive belt to the motor spindle... .
|
You were meant to remove the platter, fit the belt to the rim on its underside
and over a little hook.
You then replace the platter positioned so that the hook is lined-up with the motor pulley, and rotate clockwise. The motor pulley then grabs the belt from the hook, and hey presto, you're threaded up and ready to play! Takes a few tries sometimes though.
Horrid decks though IMHO!
Nick