View Single Post
Old 21st Jun 2019, 2:47 pm   #10
alexbaker89
Diode
 
Join Date: Jun 2019
Location: Stevenage, Hertfordshire, UK.
Posts: 3
Default Re: Blaupunkt CR43 Pre-out

Thanks 'LIVEWIRE?'.

I'm hoping the type of plug style is the same on the SQR 88 as it is on the BEQ 80, or potentially a BEQ F/R to make life easier when sourcing cables if I end up building a splitter.

The reason I'm using 2x two channel amps is because the rear speakers (MD 1690's) are larger and require more power than the speakers I'll be using in the front. A 4 channel Blaupunkt amp of that era usually supplies 4x 25W max - good enough for the front but not enough juice for the rear.

So, I'm going to use a BSA 40 MS for the front, and something like a BSA 107 for the rear.
alexbaker89 is offline