UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

SiriusHardware · 15th Dec 2018, 3:11 am

If you are serious about it I would look at the connections for the VDU and try to have the various signals arrive at the edge connector in the order in which the VDU needs them. Probably the greatest difficulty presented by the VDU was the fact that there wasn't any provision to connect it to the main board. Later issue boards had contact fingers on the underside of the top edge connector but they still weren't tracked to anywhere.

15th Dec 2018, 3:11 am	#129
SiriusHardware Dekatron Join Date: Aug 2011 Location: Newcastle, Tyne and Wear, UK. Posts: 11,553	Re: MK14 schematic revisions If you are serious about it I would look at the connections for the VDU and try to have the various signals arrive at the edge connector in the order in which the VDU needs them. Probably the greatest difficulty presented by the VDU was the fact that there wasn't any provision to connect it to the main board. Later issue boards had contact fingers on the underside of the top edge connector but they still weren't tracked to anywhere.