UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

adibrook · 17th Jul 2006, 8:05 pm

I presume that these extra resistors are to make lower voltage?

I built a circuit simular to the on in the Muntz tramsmitter, only i used my own psu with a big 1M pot to control voltage. I ran the circuit on abut 150V.

So far i see 1MHz sine oscillations on pin 2. Thats pretty good i guess. But thers nothing on pin 5...The anode load is 12k.

17th Jul 2006, 8:05 pm	#15
adibrook Retired Dormant Member Join Date: Dec 2004 Location: Weymouth, Dorset, UK. Posts: 377	Re: should this work? I presume that these extra resistors are to make lower voltage? I built a circuit simular to the on in the Muntz tramsmitter, only i used my own psu with a big 1M pot to control voltage. I ran the circuit on abut 150V. So far i see 1MHz sine oscillations on pin 2. Thats pretty good i guess. But thers nothing on pin 5...The anode load is 12k.