View Single Post
Old 11th Jul 2018, 2:54 pm   #18
georgedb
Retired Dormant Member
 
Join Date: Jul 2018
Location: Amsterdam, The Netherlands
Posts: 10
Default Re: Tesla MH74S571 programming.

Thanks for the binaries. I own an issue V and they are still called IC2 and IC3 ;-) See the pictures.
Standards and former Eastern Europe... it might have been a bad combination ;-) Indeed I think that all 74's should be equal, but I have heard earlier of slight differences. Back in the day, standards must have been terrible looking at all variant of the 2708 EPROMs.

For the programming specs... I'll see what I can dig up? Did anyone ask Martin? I wanted to attach a revamped version of the datasheet parts I had found, but I'm not able to upload it (although it is only 2.2Mb or something). Revamped them a bit so at least all pages have the same size.

Another interesting thing is the use of the 74L86 which cannot be replaced with a 74LS86 as these are not pin compatible. Has nothing to do with different manufacturers, but still quite confusing.

That is an interesting remark, about all connections defaulting to 0 rather than 1... That would suggest a completely different setup/technology was used.

We will get there (but it might take some time)...
Attached Thumbnails
Click image for larger version

Name:	20180630_124336.jpg
Views:	199
Size:	88.0 KB
ID:	165898   Click image for larger version

Name:	20180630_124328.jpg
Views:	200
Size:	99.1 KB
ID:	165899  
georgedb is offline