View Single Post
Old 18th Jul 2017, 8:37 am   #6
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: Help needed Identifying this resistor Black & Decker Drill Charger

Your best bet is to find someone who has a drill charger with an undamaged resistor who can read the colour code from the resistor. This will enable you to determine its value.

I'll hazard a guess at Brown, Brown, Black which is 110R.

Where does the resistor sit in the circuit? I'm guessing that the leads T+, T-, B+ and B- go to the battery. Is the resistor wired in series with one of these leads?
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is online now