Re: Connecting Garrard 2025TC DIN to phono RCA amp.
Hello and welcome - the earthing should be taken care of by the interconnect you have bought - but you could try connecting the chassis of the Garrard to the earth point (chassis) of your amp and see if that helps. I assume you have a magnetic cartridge in the 2025? A ceramic cart would overload your phono input. If that's all OK then what you have sounds like an earth loop, which is normally caused by too many earth connections rather than too few.
__________________
'....don't go mistaking Paradise for that home across the road!' (Bob Dylan)
|