UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Elizabethan LZ-29

Station X · 2nd May 2019, 1:22 pm

Connecting a meter "across" a component means connecting the meter to the tags or leads at each end of that component.

Start by setting the meter to the highest AC voltage range then switch down the ranges until you get a sensible reading.

2nd May 2019, 1:22 pm	#48
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,289	Re: Elizabethan LZ-29 Connecting a meter "across" a component means connecting the meter to the tags or leads at each end of that component. Start by setting the meter to the highest AC voltage range then switch down the ranges until you get a sensible reading. Attached Thumbnails __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.