View Single Post
Old 23rd Apr 2019, 8:59 pm   #5
Steve G4WCS
Hexode
 
Steve G4WCS's Avatar
 
Join Date: Sep 2004
Location: Preston, Lancashire, UK.
Posts: 252
Default Re: “Spun” knob inserts

Jac.
I turned a length of free machining aluminium bar down to the right diameter.
Faced it off with a sharp lathe tool and played about with the feed until the surface looked right, then with a parting tool, parted thin “slices” off at the correct thickness
Steve G4WCS is offline   Reply With Quote