Re: The "Sussex" Homebrew Valve Tester.
Hi all,
I have just waded through all posts in this thread as I am about to start on constructing my Sussex tester.
Having read about possible problems with parasitic oscillations I would like to avoid them from the outset and have read about connecting all valveholder pins in a loop. It will be easier for me to do this during construction rather having to change existing wiring at a later stage.
The attached diagram shows my understanding of how to do this, for clarity I have only shown 2 pins wired in green and blue.
Am I correct in my interpretation? Any suggestions or tips on construction gratefully received.
Many thanks
__________________
Eddie
BVWS Member.
Friend of the BVWTM
|