UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

sexton_mallard · 20th Sep 2019, 11:08 pm

I had one of the line coil connections seemingly on the wrong tag, the one in the centre. The frame coils only have two connections. Now I get a 3 inch collapsed frame which varies in height slightly with adjustment of the controls. Boost voltage is up to 640 volts and the brightness has to be turned right down. The tube seems to be good! Present personal circumstances has limited my 'shed' time to tinker away. I will check for causes of the compressed height next.

20th Sep 2019, 11:08 pm	#87
sexton_mallard Heptode Join Date: Sep 2013 Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland. Posts: 501	Re: Kolster Brandes RV 10 (Crown) I had one of the line coil connections seemingly on the wrong tag, the one in the centre. The frame coils only have two connections. Now I get a 3 inch collapsed frame which varies in height slightly with adjustment of the controls. Boost voltage is up to 640 volts and the brightness has to be turned right down. The tube seems to be good! Present personal circumstances has limited my 'shed' time to tinker away. I will check for causes of the compressed height next. Attached Thumbnails __________________ Dom Less snakes...more ladders!