[ORAWA01]

Originally Posted by Terry_VK5TM

There's no seperate service manual for the FT7, all the info is in the one book that came with the rig.

Just thinking about it, another low power problem can be caused by oxidised contacts on the band switch, so another place to check.

Parts, well, unless you are lucky like I was (obtained complete new RF motherboard a few years ago) parts need to come from another donor rig. I had the burnt out filter in the rig I was given and was looking at DIY replacement but didn't get any further in working out what was needed.

The modules are just plug-in, no securing screws.

Great info. Thanks.