Quote:
Originally Posted by bigus01
So, in essence, if I disconnect capacitor it should clear the fault and work OK?
|
Well, it might...
If it doesn't, there's a fault on your wiring that will require more in-depth investigation. But it can be done.
Now you're this far, start with the telephone chassis and find the fault. Then once you've found it, connect the handset as suggested (making sure the terminals 4 and 5 on the dial strip on top of the chassis are shorted together) and see if your mic works when you plug the telephone onto the line. Start with the carbon mic then try your T21A.
Then connect your dial as you disconnected it and see if it still works.
Then case it up.