Quote:
Originally Posted by Michael Maurice
Quote:
Originally Posted by Refugee
If you have a spare small transformer and relay you can wire it across the gram motor.
No holes need to be drilled in the cabinet and you can have BT while you are changing the records.
|
The o/P would need to tap into the switched supply for the motor. |
I agree but remember that the motor switch is easy to see and work on.
It is going to be easier than finding that tone control capacitor and changing it in order to shut that crackly tone control up.
If that is so than the grid capacitors on the output valves aught to be changed as well.