UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

annefromla · 26th Apr 2014, 7:18 am

Thanks so much for compiling all of this information on BSR's.
I thought I had a UA15 but the UA15 schematic shows the raising bracket that attaches the idler wheel arm assembly to the raising pillar to be partially above and partially below the chassis (or do you call it the deck?) The raising bracket for my turntable is all below the chassis.
So either it is a UA15 that at some time was altered or its not a UA15 but a different model. Any ideas?

26th Apr 2014, 7:18 am	#98
annefromla Retired Dormant Member Join Date: Apr 2014 Location: Los Angeles, California, USA Posts: 4	Re: BSR record player deck identification. Thanks so much for compiling all of this information on BSR's. I thought I had a UA15 but the UA15 schematic shows the raising bracket that attaches the idler wheel arm assembly to the raising pillar to be partially above and partially below the chassis (or do you call it the deck?) The raising bracket for my turntable is all below the chassis. So either it is a UA15 that at some time was altered or its not a UA15 but a different model. Any ideas? Attached Thumbnails