26th Feb 2021, 8:58 pm
|
#690
|
Octode
Join Date: May 2012
Location: Perth, Scotland
Posts: 1,762
|
Re: Non-working Commodore PET 3016
Here's what I get:
https://drive.google.com/file/d/1Gog...ew?usp=sharing
Colin.
Quote:
Originally Posted by Mark1960
Quote:
Originally Posted by ScottishColin
The trigger options are as follows:
Sweep: Auto/Normal/Single
Slope: Rise/Fall
Colin.
There is other open-source software (Openhantek) that I could look into if this doesn't give us what we need.
|
No need to try and change the software.
Try changing sweep to Normal. The trace should then not display unless it is detecting the trigger.
For slope select Fall.
Try one more time with these settings at 20 us per division.
|
|
|
|