Re: The "Sussex" Homebrew Valve Tester.
Andy,
The majority of the resistors (apart from the one Martin mentioned) are 0.6w MF fron Rapid electronics
Switches are
2 x 1p 12w Make before Break rotary switches (Rapid Electronics 79-0100) Anode/G2 volts
1 x 3p 4w rotary switch (Rapid Electronics 79-0222) Function switch
10 x 1p 12w rotary switch (Rapid Electronics 79-0220)
(A1/A2 sel + pin selectors)
Relays are
Relays 2 x 48v low profile 8A (Rapid Electronics 60-4854 or similar
LEDS
LED1 Standard green LED
LED on relay board Standard Green LED
LED2 LED3 Low Current red LED (Rapid Electronics 56-0430 or similar
Hope this helps.
Regards
Mike
|