Thread: Zx81
View Single Post
Old 1st May 2020, 3:56 pm   #310
SiriusHardware
Dekatron
 
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 11,483
Default Re: Zx81

As you have already modified that particular ZX81 quite a bit, you might like to consider making a 16K internal RAM mod your next project.

Once again, your friends at Tynemouth Software have made it look easy:

http://blog.tynemouthsoftware.co.uk/...e-version.html

They have intentionally done it in a non-destructive way (no track cuts) so the machine can be returned to its historically correct configuration if that is ever required.

As you are starting with two-chip RAM you would have to remove those ICs first, then fit a socket in the holes designated for the single RAM IC, IC4, before you could proceed.
SiriusHardware is online now