UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

thejazzageuk · 10th Dec 2017, 3:29 pm

Thanks all- great information and advice.

I have now connected a scope to the Full RF socket- and ..success, I get a sine wave that agrees with the frequency on the generator.

Doing the same test with the 'ATTEN RF' just gives noise. I don't have a plug for the RF, so am just inserting the scope plug directly into the socket- can anyone advise what type it is?

Will try to resolve the ATTEN RF then perhaps replace the caps recommended by David E4GBT?

10th Dec 2017, 3:29 pm	#8
thejazzageuk Pentode Join Date: Feb 2014 Location: Carmarthen, Wales, UK. Posts: 238	Re: Advance E2 Signal Generator repair Thanks all- great information and advice. I have now connected a scope to the Full RF socket- and ..success, I get a sine wave that agrees with the frequency on the generator. Doing the same test with the 'ATTEN RF' just gives noise. I don't have a plug for the RF, so am just inserting the scope plug directly into the socket- can anyone advise what type it is? Will try to resolve the ATTEN RF then perhaps replace the caps recommended by David E4GBT? Attached Thumbnails