UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Taylor Valve tester 45D

karesz* · 8th Dec 2018, 6:39 pm

Hi Brockie,

HTML Code:

the biggest problem is finding one with a 6mm or below mount..

I see it others

, Bourns 3590 family is IE exactly that what you have to find and they are in 2W,10turns with 6mm shaft version on the market(exists between 200 Ohm--100Kohm) (eBay has it for ca$2

) and -of course- Mouser for €10..15 too...
be luky with it, Karl

8th Dec 2018, 6:39 pm	#16
karesz* Heptode Join Date: Jun 2010 Location: Zurich, Switzerland Posts: 538	Re: Taylor Valve tester 45D - What to check? Hi Brockie, HTML Code: the biggest problem is finding one with a 6mm or below mount.. I see it others , Bourns 3590 family is IE exactly that what you have to find and they are in 2W,10turns with 6mm shaft version on the market(exists between 200 Ohm--100Kohm) (eBay has it for ca$2 ) and -of course- Mouser for €10..15 too... be luky with it, Karl Last edited by karesz; 8th Dec 2018 at 6:49 pm.*