View Single Post
Old 25th Jun 2020, 9:13 pm   #12
DMcMahon
Dekatron
 
DMcMahon's Avatar
 
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 6,604
Default Re: Solartron CD 1400 Oscilloscope Refurbishment

Yes George the wiring loom is laced, so a lot of it is difficult to get wrong but especially at the bottom (where the wires fell off) not completely impossible, plus in that group of 6 at the bottom, is a wire not in the loom so depending upon which terminal pin that is fitted to it can throw some of the others out if the loose wire is refitted to wrong pin.

David
DMcMahon is offline