Quote:
Originally Posted by ppppenguin
should be able to draw sparks from the LOP anode and bigger sparks from the EY86 anode. DO NOT EARTH THE SCREWDRIVER. You should also be able to draw thin yellowish sparks from the EHT, either at the CRT or EY86 cathode.
|
Ok LOP i think you mean for me the PL81 TC so I did and got a little blue spark
EY86 anode i touched the lead wire where it hits the solder point, got a little blue spark.
nothing on screen when brightness adjusted
Is it alright to measure with my bench meter all pins on the CRT base? and what is the pin order?
Ok looking at the connector working clockwise from the connector notch
pin1 63v
pin2 12.5v
pin3 154v
pin4 12.6v
pin5 2.8v
pin6 154v
pin7 4.1v
pin8 98v
pin9 98v
pin10 121v
pin11 97v
pin12 4.7v