UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Humptydumpty · 12th Feb 2019, 5:38 pm

Soon back . No way am i going to move the transformer pins and nuts without desoldering half the bottom end of the set .Lots of wires are in the way . Three nuts are clear ,but one is obstructed by the loom .But with a push i think its just possible .
But i did rumage around in there and i found an item that was very hot .To hot to touch truth be told. Its about 2" long by a 1/4" and close to the C40 .Post a picture in my next post . Need to know what it is to replace it .

12th Feb 2019, 5:38 pm	#40
Humptydumpty Pentode Join Date: Aug 2010 Location: Bewdley, Worcestershire, UK. Posts: 191	Re: Capacitors for Trio 9R 59D Soon back . No way am i going to move the transformer pins and nuts without desoldering half the bottom end of the set .Lots of wires are in the way . Three nuts are clear ,but one is obstructed by the loom .But with a push i think its just possible . But i did rumage around in there and i found an item that was very hot .To hot to touch truth be told. Its about 2" long by a 1/4" and close to the C40 .Post a picture in my next post . Need to know what it is to replace it .