Quote:
I see that you chose to link over the reset jumpers
|
I'm intending to dedicate this one to the issue VI which is the MK14 I use 98% of the time now. My original MK14 is more or less 'retired' now because the issue VI is just so much more usable and it isn't a valuable historic artefact like my original issue II is.
The old machine will still be wheeled out and powered up from time to time, I'm very, very fond of it but I don't want to stress it out any more than necessary. For programming that, I have my original vero prototype of the Pi uploader or the Arduino version I built, both of which have the reset output on flying clip leads.