UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

SiriusHardware · 29th May 2020, 9:31 pm

Mine has a 4.00MHz crystal in at the moment although I have a 4.43MHz crystal on the way as I'm curious to see if this one can work with the uploader running at flat-out speed, or whether I will have to dial the speed down a bit like everyone else has so far.

I can't believe you have yours built already if you only got it today. I suppose aside from the ICs there aren't really too many other components on the PCB.

It's good that we both kicked off at the same time - with one of them definitely working at least we know that they both, in theory, should work.

29th May 2020, 9:31 pm	#448
SiriusHardware Dekatron Join Date: Aug 2011 Location: Newcastle, Tyne and Wear, UK. Posts: 11,556	Re: MK14 schematic revisions Mine has a 4.00MHz crystal in at the moment although I have a 4.43MHz crystal on the way as I'm curious to see if this one can work with the uploader running at flat-out speed, or whether I will have to dial the speed down a bit like everyone else has so far. I can't believe you have yours built already if you only got it today. I suppose aside from the ICs there aren't really too many other components on the PCB. It's good that we both kicked off at the same time - with one of them definitely working at least we know that they both, in theory, should work.