Thread: Grundig tk 24
View Single Post
Old 18th May 2021, 9:18 pm   #64
DMcMahon
Dekatron
 
DMcMahon's Avatar
 
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 3,612
Default Re: Grundig tk 24

If you have not already done it, it is important also to check the Control grid voltage of the EL 95 output pentode at pin 1. As per the ECC 81 Control grids, if any +ve voltage then best to replace both C22 (0.1uF) & C26 (0.047uF).

David
DMcMahon is online now   Reply With Quote