Hello Jake and welcome to the forum.
The N1071 has the same innards as the 332 instrument and is connected the same way. If your instrument works without a 3k3 resistor in series with the bell, just leave it with a solid link between terminals 11 and 12. A 3k3 resistor may be needed (as shown) if your telephone doesn't ring properly or draws sufficient ringing current that other instruments on your line don't ring properly.
I have an N1071 in the hall, and have had it years without problem. Mine was on an internal PAX system installed in about 1954 and I salvaged it in '84.
https://www.***********/photos/russel...7619074899495/